Plain Surface T1 Stair Tread Welded Fixing for Commercial Building Steps

Product Description

Specification

Bearing Bar Pitch	Cross Bar Pitch	Load steel size (Width * Thickness)
		20*3	25*3	32*3	40*3	20*5	25*5
30	100	G203/30/100	G253/30/100	G323/30/100	G403/30/100	G205/30/100	G255/30/100
	50	G203/30/50	G253/30/50	G323/30/50	G403/30/50	G205/30/50	G255/30/50
40	100	G203/40/100	G253/40/100	G323/40/100	G403/40/100	G205/40/100	G255/40/100
	50	G203/40/50	G253/40/50	G323/40/50	G403/40/50	G205/40/50	G255/40/50
60	50	G203/50/60	G253/50/60	G323/50/60	G403/50/60	G205/50/60	G255/50/60

Bearing Bar Pitch	Cross Bar Pitch	Load steel size (Width * Thickness)
		32*5	40*5	45*5	50*5	55*5	60*5
30	100	G325/30/100	G405/30/100	G455/30/100	G505/30/100	G555/30/100	G605/30/100
	50	G325/30/50	G405/30/50	G455/30/50	G505/30/50	G555/30/50	G605/30/50
40	100	G325/40/100	G405/40/100	G455/40/100	G505/40/100	G605/30/50	G605/40/100
	50	G325/40/50	G405/40/50	G455/40/50	G505/40/50	G555/40/50	G605/40/50
60	50	G325/50/60	G405/50/60	G455/50/60	G505/50/60	G555/50/60	G605/50/60

T1

T2

T1 type pedal, C-shaped end edge, the front edge is a C-shaped anti-slip protrusion.T1 type pedal, C-shaped end edge, the front edge is a C-shaped anti-slip protrusion. The installation method is either direct welding or connection with bolts to the ladder frame. The installation method is either direct welding or connection with bolts to the ladder frame.

T2 type pedal, with C-shaped end edge, the front and rear edges are C-shaped anti-slip protrusions. The installation method is to directly weld it or connect it to the ladder frame using bolts.

T3

T4

T3 type pedal, with the same specification as the end plate for the bearing flat steel, the front edge has a continuous anti-slip protrusion. The installation method is to directly weld it onto the ladder frame.

Type T4 pedal, wrapped with a flange plate with installation holes. The width of the flange plate is 60-65mm, and the front edge passes through the anti-slip protrusion. The installation method is to connect it to the ladder frame using bolts.

For single-person use only

Double-door access for two people

Quality Inspection

B125 LOAD CAPACITY

HOT-DIP GALVANIZING

Over 70 micrometer Zinc Service.

27500lb load capacity which can support common cars and light trucks. Application for garage, warehouse and factory.

Compared with cold galvanizing, it has a thicker zinc layer which means better corrosion resistance. But the process inevitably produces small crystal fragments. Air drying, cloudy, sunny days will also affect the surface. Can't be as bright as cold galvanized surface

Thicker than usual 30-50 micrometer which keeps better corrosion resistance

0.2in Width Flat Bars

0.28in Width Twistted Bars

Full Welding

The wide flat bars enhance the load capacity of the drain grate. Make sure it can handle the weight of a light vehicle.

Ensure the structural stability of the drain grate to extend the service life.

The structure is more stable than spot welded. No worry about damage when light vehicle passes by.

Application

Certifications

Packing & Delivery

FAQ

1. Can I have a sample order?

Yes,We design and produce samples for free 

2.Are you factory or trade company? 
We are factory,our prices are very competitive.

3.How to get a quotation? 
Provide us with the production requirements, size, quantity and arrival port, and we will promptly quote. 
4.How about the lead time?

Sample needs 1-2 days, mass production usually within 10-25 days after determining the customer's requirements.